Geekvape Aegis Legend 3 Box Mod 200w

Geekvape Aegis Legend 3 200W Box Mod

The Geekvape Aegis Legend 3 mod takes two 18650 batteries and pushes 5-200W which makes it primarily designed for MTL (Mouth To Lung) tanks at low wattage right through to sub-ohm DTL at full power. The Legend mod range has always been about toughness and the Aegis Legend 3 mod keeps that going with IP68 protection so it won’t die if you drop it or get it wet, which is why a lot of people who work outdoors or just want something that lasts end up getting one. You’ve got a 0.96-inch colour screen showing your wattage, battery level, and puff count so you can see everything at a glance.The mod legend uses dual 18650s which you buy separately to hit that 200W max output without the battery dying halfway through the day. Smart Lock stops it firing in your pocket which is something that actually works on this one, and Memory Mode saves five different wattage setups so you’re not adjusting settings every time you swap tanks around. There’s ECO Mode to stretch battery life when you’re running low and BOOSTING Mode that cranks vapour production when you want bigger clouds.The AS 4.0 chipset gives you five vaping modes including POWER Mode for manual wattage control and SMART Mode that reads your coil resistance and sets the right wattage on its own which saves you working it out. The 200W vape mod works with any 510-threaded tank you’ve already got or pairs with the Z Fli Tank if you want the matching kit setup with everything from the same range.

Geekvape Aegis Legend 3 Mod Key Features

• Dual 18650 batteries – sold separately, swap them out when low
• 5-200W power range – covers MTL and DTL vaping
• IP68 rating – dustproof, waterproof, shockproof
• 0.96-inch colour screen – shows all your vaping data
• AS 4.0 chipset – five vaping modes (POWER, TCR, ECO, SMART, BOOSTING)
• Smart Lock – stops accidental firing in your pocket
• Memory Mode – saves five custom wattage setups
• 510 connection – works with most tanks
• USB-C charging – gets batteries back to full quickly

Dual 18650 Battery Power

The Aegis Legend 3 mod needs two 18650 batteries which you buy separately and slot in. You’ll get all-day vaping at 40-60W or several hours at higher wattages before needing a recharge depending on how much you’re using it. The mod charges through USB-C but you can also swap in fresh batteries if you’ve got spares which means you’re never waiting around for a charge, you just pop new ones in and carry on. That’s the advantage of a battery mod over built-in battery setups where you have to wait for it to charge back up.

5-200W Power Range

This 200W vape mod goes from 5W up to 200W so you can run tight MTL tanks at 10-15W or push sub-ohm coils at 80W+ for clouds depending on what you’re after. The wattage adjusts in 0.1W steps so you can dial in exactly what you want instead of jumping around in big increments. SMART Mode reads your coil and suggests the right wattage which saves you working it out yourself, and BOOSTING Mode ramps power faster for instant vapour when you fire it.

AS 4.0 Chipset Modes

The AS 4.0 chipset gives you five modes depending on what you’re doing. POWER Mode is standard wattage control where you set it yourself and it stays there. TCR Mode lets you do temperature control if you’re using TC wire which some people prefer for certain builds. ECO Mode drops power slightly to stretch the battery when you’re running low and need it to last a bit longer. SMART Mode detects your coil and sets the wattage on its own. BOOSTING Mode cranks the ramp speed for thicker vapour instantly when you hit the fire button.

Smart Lock System

Smart Lock’s got three layers so it won’t fire in your pocket which is the main thing you want from a lock. Touch Lock stops the screen changing settings when it’s in your pocket or bag. Button Lock disables the fire button so you can’t trigger it by accident when you’re carrying it around. Unlock Mode lets you unlock everything with a quick button combo when you’re ready to vape and it takes about two seconds. It actually stops phantom firing which is better than most lock systems on high-wattage mods where you end up with a hot mod in your pocket.

0.96-Inch Colour Screen

The screen’s 0.96 inches and it shows your wattage, battery percentage, coil resistance, voltage, and how many puffs you’ve done. Everything’s colour-coded which makes it easy to see what you need at a glance without scrolling through menus. It’s quick when you’re changing settings and it’s bright enough to see outside but it won’t drain your battery any faster than normal, which some screens do if they’re too bright all the time.

IP68 Durability Rating

IP68 means it’s completely sealed against dust getting inside, it’ll survive drops and knocks, and you can get it wet without killing it – water-resistant up to 1.5 meters for 30 minutes. The Aegis Legend range has always been the one to get if you work outdoors or just want a mod that won’t die when you drop it, which you will at some point. The rubberised shell takes the impact and the sealed internals keep dust and water out so it’ll keep working even if you’re rough with it or using it in bad weather.

Memory Mode Setup

Memory Mode saves five different wattage setups which is handy if you swap tanks around depending on what you’re doing. If you’ve got an MTL tank you use at 12W and a sub-ohm tank at 60W you can save both and just pick the memory slot when you swap instead of resetting wattage every time, which gets annoying after a while. Takes two seconds to switch and you’re back to your setting without fiddling around with the buttons.

Tank Compatibility

The 510 connection works with RTAs, RDAs, and sub-ohm tanks so you can use whatever you’ve already got lying around. The Geekvape Aegis Legend 3 Kit pairs this mod legend with the Z Fli Tank which has top airflow and a flip-top refill system if you want the matching setup with everything from the same range and it looks better that way. But any 510-threaded tank you’ve already got will work fine on it so you don’t need to buy new tanks if you don’t want to.

Geekvape Aegis Legend 3 Mod Specifications

Why Choose the Geekvape Aegis Legend 3 Mod?

The Legend 3 mod by Geekvape is built for vapers who need a 200W box mod that won’t break when you drop it, which happens more than you’d think. You’ve got IP68 protection so it won’t die from dust or water, dual 18650 power so you can swap batteries instead of waiting for a charge, and five chipset modes so you can run it however you want. If you vape outdoors or work in rough conditions or just want a mod that lasts more than six months without falling apart, this one’s tougher than most and it’ll take the abuse.The 5-200W range means you can run MTL tanks at low wattage if you’re after a tight draw or push sub-ohm coils at high power for clouds depending on what you’re in the mood for. Memory Mode saves you time if you switch between tanks regularly because you’re not resetting wattage every time you swap, you just pick the memory slot and go. Smart Lock actually works to stop pocket firing which is more than you can say for most high-wattage mods where the lock either doesn’t work properly or takes ages to unlock when you need it.Battery life depends on your wattage but dual 18650s give you solid all-day performance at 40-60W or several hours at 100W+ if you’re cloud chasing. Grab spare 18650 batteries so you can swap them when you’re low instead of waiting for a charge, which means you’re never stuck without power if you’ve got a spare set on you.

What’s In The Box

• 1 x Geekvape Aegis Legend 3 Mod
• 1 x USB-C Charging Cable
• 1 x User Manual